Eizo FlexScan HD2441W Manual de usuario descargar pdf (Pagina 11)

English

TroubleshootingSetting/AdjustmentPrior to use Installation

3. Connect the USB cable to the USB ports on the PC (downstream) and the monitor (upstream).

Be sure to connect to the USB port (upstream) that complies to the PC (PC 1/PC 2).

• DVI-D connector (PC 1): PC 1 USB port is used.

• D-Sub mini 15-pin connector (PC 2): PC 2 USB port is used.

Connectors on the

Downstream

Connectors on the

monitor

Upstream

USB cable MD-C93 (supplied)

When connecting two PCs to the

monitor, please purchase another cable.

Attention

• When connecting the monitor to a PC using a USB cable, the USB setting on the monitor should be

changed corresponding to the PC used (see page 13).

NOTE

• The monitor is equipped with the USB audio function. You may enjoy sound from PC with speakers by

connecting the USB cables.

Connects USB devices.

1. Connect USB devices (keyboard, mouse, etc.) to the USB port (downstream) on the monitor.

Attention

• After connecting the USB devices and turning on the monitor, the USB function is set up

automatically.

• This monitor may not work properly depending on the PC, OS or USB devices used. (For USB

compliance of the respective devices, consult their manufacturers.)

Connectors on the

monitor

Downstream

Keyboard

Mouse

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 147 148

Sin comentarios

Eizo FlexScan HD2441W Manual de usuario Pagina 11