Eizo FlexScan Color LCD Monitor S2242W Manual de usuario descargar pdf (Pagina 29)

Chapter 3 Connecting Cables

●

To set input signal selection [Input Signal]

The monitor recognizes the connector through which PC signals are input.

When either PC is turned off or enters the power-saving mode, the monitor

automatically displays signals of another PC.

Priority setting Function

Auto When either PC is turned off or enters the power-

saving mode, the monitor automatically displays

signals of another PC.

Manual The monitor detects only the PC’s signals currently

displaying automatically. Select an active input signal

with .

[Input signal setting]

(1) Choose <Others> from the Adjustment menu, and press

(2) Choose <Input Signal> from the <Others> menu, and press .

The <Input Signal> menu appears.

(3) Select “Auto” or “Manual” with or , and press .

The setting is completed.

3-2 Adjusting the DVI Input Level

[DVI Input Level]

This function allows you to adjust the DVI signal input level when using a DVI

long cable.

Adjustment range: Auto, Manual (1 to 8)

(1) Press to turn off the monitor.

(2) Press holding down to turn on the monitor.

The <DVI Input Level> adjustment menu appears.

(3) Select “Auto” or “Manual” with or .

When selecting “Manual”, adjust the input level with or to display correctly.

(4) Press .

The adjustment is completed.

Attention

• Select "Manual" only if a noise

appears on the screen when using a

DVI long cable.

Attention

• Select "Manual" only if a noise

appears on the screen when using a

DVI long cable.

NOTE

• When “Auto” is selected for <Input

Signal>, the monitor’s power-saving

function works only when the two

PCs are in the power-saving mode.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 50 51

Comentarios a estos manuales

Sin comentarios

Eizo FlexScan Color LCD Monitor S2242W Manual de usuario Pagina 29

Comentarios a estos manuales

Relacionado con productos y manuales para Vídeo del coche Eizo FlexScan Color LCD Monitor S2242W